You are here

Introducing Vingtor-Stentofon Pulse

The system is easy to install as it requires no central exchange.

Reduce installation time and cost

Vingtor-Stentofon Pulse provides a smart and simple interface that reduces installation time and cost. To install Pulse, one station is selected as the primary station or system master. This master station provides SIP server functions to the other stations in the system and optionally any third party IP telephones and gateways. Depending on the number of stations in the system, basic installation can be completed in less than 10 minutes.

No central server is required

After the management software is activated for the chosen master station, all that is required is configuration of directory numbers of the other stations. Since the system does not require a central server, connection of the IP stations to the network is all that is needed for system set-up.

  • IP based marine intercom system for up to 16 users (Intercom, Dect, Telephone & IP speakers)
  • Support Power over Ethernet
  • Supports external communication (GSM, Analog gateway)
  • Supports interface to PA
  • Superb audio quality – high bandwidth codec, active noise cancellation, acoustic echo cancellation
  • Remote control of external audible or visible signal devices
  • Easy to install

New Oil & Gas video

Farewell from Innotrans 2018

Intelligent Automatic Volume Control (AVC) showcased at Innotrans 2018

Exigo SIP-mode amplifiers debut at InnoTrans