Skip to main content


Item Number: 1023301311

Network Horn Speaker, 10W, Ethernet, Microphone

  • Zenitel Audio Presence - crystal clear audio
  • 10W Class D, built-in amplifier
  • Protected from dust and Water - IP66
  • 116 dB SPL (1m)
  • Ideal for Micro Zone PA and systems that require a limited number of speakers
  • Each speaker is individually addressable and monitored
  • ONVIF Compatible
  • Ideal for speakers installed in remote locations, e.g. roads and railways
  • Remote software upgrade and configuration
  • Relay output for remote control, e.g. doors, signal lamps, gates
  • Powered from the IP network cable using Power over Ethernet (PoE)
  • Ideal for Building Security, Infrastructure and Industrial projects
alphacom_40x40 ICX-AlphaCom
EXIGO_40x40 Exigo
IP66 IP66
Automatic Volume Adjustment Automatic Volume
HD Voice HD Voice

This IP speaker features a 10W Class D amplifier, powered over PoE. This means that the speaker is capable of delivering more than 116 dB, depending on the signal input from a single Ethernet cable. The Horn design give better directivity over that of a cabinet speaker, and ideal for more target audio messages, or installation in challenging acoustic environments where increased directivity is key to intelligible audio.

With IP, the system is able to monitor and address each speaker individually. By moving the amplifier from a central unit out to the speaker itself, the need for a central amplifier unit with conventional speaker loops is eliminated. This makes the system highly scalable, and adding another speaker is easy to do.

Whilst conventional speaker loops are not used, the speakers can still be divided into groups. These zones can now extend over networks or span the Internet. To provide maximum availability, the speaker comes with advanced supervision functions.

The built-in microphone enables intelligent features such as Self-checking, and Automatic Volume Control. It also enhances what is traditionally a broadcast-only medium adding Half Duplex speech, and Ambient Listen functions. Self-checking will detect whether there are any faults in the network or speaker electronics. The status of the speaker is reported to the central unit as well as to 3rd-party management systems using SNMP or Syslog. The speakers can also be discovered, receive messages, and use Talkback direct to a VMS over ONVIF.

The speaker has a built-in web interface for status information, control, and upgrade. It is easy to install and maintain. In addition, there are possibilities where broadcasts can be logged in detailed reports.

Internal speaker amplifier 10 W class D
Max. sound pressure level at 1 meter 116 dB
Dispersion (-6dB) 1kHz / 4kHz 140° / 40°
Directivity factor, Q 1,8
Codecs G.711, G.722
Frequency range, G.722 Codec 200 Hz – 7000 Hz
Mounting Bracket (included)
Weight 1.8 kg / 4 lbs
Material / Color ASA (plastic) / RAL 7035 (light grey)
Electronics cover material ASA (plastic)
Gasket material Silicone rubber
IP Rating IP66, tested according to EN 60529
Operating temperature range -40° to 70° C / -40° to 158 ° F
Storage temperature range -40° to 70° C / -40° to 158 ° F
Relative humidity < 95% not condensing
EMC CE and FCC Part 15
Ethernet connector 1 x RJ 45
All other connectors Tool less, spring loaded, vibration proof terminals
General inputs and outputs 6 (configurable)
Outputs 12mA as LED drivers
Change-over relay (NO+NC+COM) Max: 250VAC/220VDC, 2A, 60W
Power options PoE
PoE (power over Ethernet) IEEE 802.3af standard, Class 0 (0.44W to 12.95 W)
Power consumption Idle 1.8W, max 12W (depending on volume)
Audio line out / induction loop signal 600 Ohm
Protocols IPv4 (with DiffServ), SIP, TCP, UDP, Unicast, Multicast, HTTPS, TFTP, RTP, DHCP, SNMPv2c, ONVIF, CCoIP® , NTP
LAN protocols Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x)
Management and operation HTTP/HTTPS (Web configuration) DHCP and static IP + IC-EDGE™. Remote automatic software upgrade. Centralized monitoring
Advanced supervision functions E.g. network test, tone test, status reports
SIP support RFC 3261 (SIP base standard), RFC 3515 (SIP refer), RFC 2976 (SIP info)
DTMF support RFC 2833, 2976 (SIP info)
IP address information Speaks IP address after system boot
Country of manufacture Poland
Dimensions (HxWxD) 144 x 186 x 207 mm
Weight 1.65 kg
Encapsulation material ASA plastic
DIN-rail clips Wago 209 (included)
Boxed Weight 1.8 kg / 4 lbs
Box Dimensions (Width x Height x Depth) 250 x 210 x 170 mm

Polar plot


Microphone for Network Loudspeakers


Network Long Horn Speaker, 10W, Ethernet, Microphone



Network Ceiling Speaker, 10W, Ethernet, Microphone


Network Projector Speaker, 10W, Bi-Directional, Ethernet


Network On-Wall Cabinet Speaker, 10W, Ethernet, Mic

Date Name Category Size Document
23.10.2023 FCC Declaration IP Speakers Declaration 115.72 KB Download
23.10.2023 CE Declaration Horn IP Speakers Declaration 137.02 KB Download
19.10.2023 RoHS Declaration IP Speakers Declaration 90.64 KB Download
8.02.2023 IP-speakers brochure Brochure 2.27 MB Download
22.11.2022 UKCA Declaration IP Speakers Declaration 141.47 KB Download